Bumper Removal?
 

Anyone check for me on how to remove the front bumper please?

Thanks chaps :)

I'll try to look again on ELSAWin later, but I looked at it before.

You need to pop off the undertray connections, and take the wheel arch liners out.

There are 4 bolts, 2 either side inside the bumper that hold it on, along with a couple of scres inside and around the grille area. You need to be careful that you don't stretch/snap the washer pipe or cables.

Great thanks. If you have a picture snapshot from ELSA that would be superb as well.

New bumper arrived today, so can get about lining up and seeing where the bolts go and what I need to adapt.