A8 D3 Values in Adaptation Mode
Can someone post Adaptation values in VCDS that he has in channel Climatronic (Auto HVAC) please? Also if that's not a problem if someone has working Webasto please post coding of your Aux Heating and Adaptation Values as well.
Thanks! |
The settings depend on what you are trying to do.
Have you read this thread? http://forum.a8parts.co.uk/showthread.php?t=13803There are two important Aux Heater settings in the PDF attached to the thread. I did get rather deep into this area last year but I've mislaid all my notes whilst spending visiting hospitalised wife. Now she's back home I am having trouble finding them. Daughter-out-Law tidied everything = lost.:mad: |
What I am trying to do is to finally get the Webasto working. Short story it was working automatically without any controls in MMI, and was affecting fuel consumption and temperature gauge. I managed to enable controls, temperature gauge and fuel consumption was fixed but there was no icons from Aux Heating in the cluster. I fixed that too, Webasto is working, controls and timer as well, but the problem is that if I set the timer it turns on but have very low air output and blowing cold air. But when I turn ignition on it starts working properly and inside is warm straight away. So my guess is that I have something wrong in one of the Adaptation Channels in Auto HVAC.
I know that in one week I won't probably need it for a long long time, but I hate when something is not working as it should. That's why if you have any ideas I will be grateful. |
Hi Leo,
Apologies, very busy week. I'll do a dump for you over the weekend and see what we have. Somebody else will hopefully put their oar in before then. I have a meeting in Chepstow and a funeral in Saltash this week. Ray |
That's perfectly fine, no rush :). Thanks.
|
2 Attachment(s)
Here you are Leo,
As per your request. |
Thank you mate!
|
All times are GMT. The time now is 12:27 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.