Headlight adjutment help needed please
I finally fitted the UK bi-xenons I bough from Neil a while ago.
I have a problem during adaptation. When I go to channel 55 group 001 and press go! all it says is "error group not available" I wasn't expecting this. Does anyone know why this may be? Could it be due to coding, headlights being RHD and car being LHD? |
Sorry should have checked this before posting. The little sensor that clips onto the control arm for headlight level has come off again. I'll re-attach it tomorrow and try again.
|
YAY! It worked. I now have a frankenS8 with RHD headlights.
I just hope I adjusted them precisely enough to pass the MOT. The headlights are only 65cm high, I adjusted the beam to around 62cm high about 3m away. I hope this will be ok. |
+++
|
Quote:
|
1 Attachment(s)
Quote:
MOT passed yay! what a relief! Now I have some shiny new lights. One of the old ones was yellowing a lot anyway. http://forum.a8parts.co.uk/attachmen...1&d=1534620781 |
The front end looks very fresh +++
Out of interest, what colour is your car Goran? |
Looking good +++
Steering wheel's still on the wrong side though ;) |
Quote:
Photos do wonders, the stone chips and a small patch of peeling lacquer dont even show up :D Quote:
If only Mikki and Mike hurry up with the manual solution maybe I can ditch this thing and get a RHD to convert. |
I'm going as fast as I can but people keep bringing me more work! :p
|
All times are GMT. The time now is 02:05 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.