ABS Module removal
HI,
I've been away for a couple of months and now my A8 has developed a myriad of problems.....ABS module, EPB faults and level sensor issues. I want to get the ABS module done first as it dumps the speedo' and power steering when the lights come on which is quite regular now. I need to get my ABS module repaired and getting it off is proving a bit of a problem. Has anyone encountered the torx screw heads being rounded and if so, how did you get them out? Any help gratefully received as always... |
Since the torx is now rounded have you tried forcing a hex allen key into the torx head, if you select the correct size it should be enough to undo the torx
|
Sorry to read of your woes. Are you removing the electronics from the hydraulic block? Should be 6 torx screws. If they are all rounded I don't think you've much choice from drilling them out or trying a screw extractor set.
|
Thanks guys, I'll try what I can and then send it he bad unit off for repair. Got to get the girl back to tip top condition.
|
Got the module repaired and just need to check out the front near side speed sensor...only three more outstanding things now. EPB, HVAC no cold air and a dodgy level sensor. £245 all in for ABS module test and repair and great to have the beast back..changed the tyres too while she was standing for a week or so...
Thanks for the help guys. |
All times are GMT. The time now is 08:58 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.