Disabling start/stop by default from engine on
 

Anybody happen to know if it's possible to disable start/stop by default on a 2014 A6 (TDI 3.0-litre) with VCDS?

Audi said it can be disabled by default, but they will not do it.

I did so on my c7 as follows:
Disable Start / Stop
[Select]
[09-Cent. Elect.]
[Security Access - 16] (enter security code - 20113)
[Adaptation - 10]
Select Channel 34 and Read
if you subtract 4 from the original value. Test then save --> Start&Stop always disabled

I've got a button on the dashboard in A3 for disabling it.
Dont know if thats permanent until pressed again or it lasts only until next time you start the engine.
I can check it tomorrow +++
(in the bed with Jack Daniels :D)

Looks like Kele solved your problem while I was typing my reply +++

If it is like the dash button on mine, then it resets with engine off. With the adaption you don't have to worry about switching it off at every start up....

Thanks. That coding above looks promising so will give it a go ^ ^ ^ ^ ^ +++

It's for a friend of mine and he doesn't like the start/stop activating on every start. Instead wants it off all the time.

On the D4 you can play with the logic, reverse the button so you have to switch it on, set it to be sticky (remembers if it is on or off) or just disable all together +++

Disable/memorize/invert Start & Stop
[Select]
[09-Cent. Elect.]
[Security Access - 16] (enter security code - 20113)
[Adaptation - 10]
Select Channel 34 and Read
if you subtract 4 from the original value --> Start&Stop always disabled
if you add 32 to the original value --> memorize last status (the Start & Stop status at engine startup will be the one at last engine shutdown)
if you add 64 to the original value --> Start & Stop button light will be reversed: off if Start & Stop is disabled, and on if Start & Stop is enabled.
Press Test then press Save