Key programming issue
Hi all
One of my keys seems to have stopped working. Have changed batteries etc but here is the odd thing. When I do the reprogramming sequence all works fine but the key that was working (used to turn on ignition for reprogramming sequence), then stops working and the one I programme, is fine. Then I try the sequence with the one that has stopped working, and that one is fine, and the other one won’t work anymore. Basically I can only ever have one of the two keys working! Anyone got any ideas?? Thanks Mossy |
It's a long time since I tried reprogramming remote key fobs myself but, according to my notes, these are the correct procedures that worked. I do remember it's a bit of a faff, and it can take several attempts to get it right, especially if you have 2 or more fobs to program.
(Note the additional step required to program multiple remote fobs) Quote:
|
I also found this in my notes, but I don't think I've ever tried it (I'm not even sure where this info originally came from):
Quote:
|
That’s brilliant thank you. Will give it a go later on.
|
All times are GMT. The time now is 12:45 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.