headlamp cornering light fault
 

hi guys

dont know if anyone has come across the fault before

Address 55: Headlight Range Labels: 4H4-907-357-V1.clb
Control Module Part Number: 4H4 907 357 HW: 4H4 907 357
Component and/or Version: ....AFS13.... H01 0055
Software Coding: 11116F33F918EA00
Work Shop Code: WSC 02313 785 00200
ASAM Dataset: EV_AdvanFrontSyste 005001 (AU64)
ROD: EV_AdvanFrontSyste_AU21.rod
VCID: 6FEBEFB8B6964F3A49-803A
1 Fault Found:

572427 - Stationary Cornering Lamp Right
C1084 13 [137] - Open Circuit
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 110
Mileage: 104234 km
Date: 2016.08.23
Time: 17:09:01

Tuesday,23,August,2016,17:34:58:02883
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 16.8.0.3 (x64)
Data version: 20160803 DS255
www.Ross-Tech.com



any ideas would be good cheers guys

Open circuit could be anything from a broken wire to a blown bulb?

thanks

the vehicle comes up with an adaptive light fault when its dark only
(lights are set to auto)

is the adaptive light part of the headlight or is it part of the fog lights ???

cant get my front fog lights to come on at all
in auto or manual

Usually the cornering light is a bulb situated at an angle between the projector for the dipped beam and the DRL.

Couldn't really comment on the fog lights. All seems very odd.

This may help:

http://i67.tinypic.com/2h31nyd.jpg

The adaptive cornering light is the one sticking out at an angle and you can see it working at night by turning the wheel each way when you're stationary. Fog lights are just fog lights, they won't come on automatically under any circumstances.

sorted it thanks guys

after checking the multiple fuses for the headlights
i removed the headlight itself and found a blown bulb on the drivers side
replaced it and still nothing

checked passenger side and that was ok

went back into vcds and cleared the fault and everything started to work again

so all sorted thanks

Wow - needing to reset a fault code after a simple lamp (bulb) replacement seems like a good cash cow for Audi!?!? :tuttut:

Where would we be without VCDS!? :ROFL:

yes

my feelings exactly
but its only like the handbooks favourite phrase
"please return your vehicle to your authorised audi dealer"

and why didnt it give me a simple bulb warning light instead of the
major meltdown warning lights and buzzers **** :tuttut:

That is slightly concerning if the only thing wrong was in fact a bulb. Either way, glad you're all sorted.