Camshaft profile and overlap for 40V engine
 

Did any have any info about 4.2 (310hp) or 3.7 (260hp) engine from D2?

Have some info about D3 and BCY engine and S8 D2. But is interested to know how is A8 engine.

I'm sure that info is in Elsawin. I will have a look later :)

Here you are +++

Thank you for fast answer, BUT this is for 32v engine. I specificly try to find info for 40V engine. Have the same info at my elsa. But missing for 40V.

To be correct, search info for these engine:
AQF,AQG, ARU, AUW, AKB, AKC, AVN, AUX or from A6(4b4 chassis) ARS, AQG, ASG, ANK, BBD, ART.

Sorry for some reason I thought you were asking about the 32V :rolleyes:

I'll look up the 40Vs later :)

Not published for the 40V engines :(

Well same story at my elsa. It have for D3, but not for D2.

I need to choose which camshaft is better for boost. S8 have 33 + 22 degree overlap so this is a waste of boost. Even Rs6 40v have 17+22 degree, just think which combo of camshafts will be better. Just looking for A6/8 40v engine camshaft profile.