A8 Parts Forum

A8 Parts Forum (https://forum.a8parts.co.uk/index.php)
-   House and Home DIY (https://forum.a8parts.co.uk/forumdisplay.php?f=78)
-   -   IKEA Stolmen Furniture (https://forum.a8parts.co.uk/showthread.php?t=11416)

tc4332 3rd April 2016 04:14 PM

IKEA Stolmen Furniture
 
We have a couple of IKEA Stolmen units and in her wisdom SWMBO has decided that we need to reconfigure the set up.
Of course this means that we need some extra parts and IKEA only stocks them in USA.
Tongue in cheek time.
I need
  1. one support pole (floor to ceiling)
  2. one cross rail (110cm)
  3. one shelf (110cm)
  4. and a few brackets
Anyone having some bits lying around?

Delboy 3rd April 2016 04:20 PM

Throw it all in the skip and do this instead :p

https://www.etsy.com/uk/listing/1683...9J5BoCcRLw_wcB

tintin 3rd April 2016 10:53 PM

How much?
 
£995?!!

tc4332 4th April 2016 02:04 AM

Steve,
I only paid £150 for all that I have new from IKEA.
What I need would be £40 or £50.
I see on Fleebay a chap is offering something like ten times what I have for £900. Probably more than IKEA ever had?????
Probably works for Audi.

Dezzy 4th April 2016 07:16 AM

Quote:

Originally Posted by tc4332 (Post 109341)
We have a couple of IKEA Stolmen units and in her wisdom SWMBO has decided that we need to reconfigure the set up.
Of course this means that we need some extra parts and IKEA only stocks them in USA.
Tongue in cheek time.
I need
  1. one support pole (floor to ceiling)
  2. one cross rail (110cm)
  3. one shelf (110cm)
  4. and a few brackets
Anyone having some bits lying around?

Come on, no one?

tc4332 4th April 2016 08:26 AM

Looks like no one has the same bad taste as us :)

Unless you are all too ashamed to admit having bought some :ROFL:

Or so liking it you want to keep it :Confused:

Architex_mA8tey 4th April 2016 12:40 PM

Quote:

Originally Posted by tc4332 (Post 109372)
Looks like no one has the same bad taste as us :)

Unless you are all too ashamed to admit having bought some :ROFL:

Or so liking it you want to keep it :Confused:

Ohhh, STOLMAN furniture, I thought you said STOLEN!! :D :p

Dezzy 4th April 2016 02:20 PM

I was just wondering, that you need to make sure if the floor to ceiling support pole is fixed properly Ray, i've see videos of those when it goes wrong or is it not one of those sort of poles.


Quote:

Originally Posted by Architex_mA8tey (Post 109386)
Ohhh, STOLMAN furniture, I thought you said STOLEN!! :D :p

Ahhh that's why no one was admitting to it.

Delboy 4th April 2016 03:00 PM

Quote:

Originally Posted by tintin (Post 109361)
£995?!!

I know, gas pipe and scaffold boards, do like the look though but would build it myself for a fraction of the price

tc4332 4th April 2016 03:08 PM

The support poles have flat plates at the top that ideally are screwed through the ceiling plaster into the ceiling joists. The base plate can be screwed to the floor.
As is usual things can only be as good as they are designed to be if used/fitted correctly.
SWMBO is always telling me that I over engineer whenever I do things. Where builders hammer nails in I screw.

As for self build, that is probably what we will have to do if nobody comes up with anything.


All times are GMT. The time now is 03:54 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.