WANTED: set of 19" or 20" S8 wheels
 

I am looking for a set of 19" (preferably but 20" considered) wheels to fit an Audi D3 S8 for winter tyre fitment. ET of around 45.

I will be selling my decent set of factory d3 19 turbine shortly. Decent tyres and good nick? 255/40/19.

Thanks but not sure the tyre size is a great match for 275/35/20 OEM.
What width and ET are the rims?

It depends on the offset of the wheel in terms of exactly how close but if they are winter wheels then they sound pretty close, don't forget you're changing the whole wheel and tyre and the whole overall diameter isn't going to be hugely different - check it out on www.willtheyfit.com

Assuming the offset and wheel width is the same -
CURRENT NEW
Diameter 700.5mm 686.6mm
Circumference 2200.7mm 2157mm
Poke 62mm 62mm
Inset 154mm 154mm
Speedo error 0% 2.02%
Reading at 30mph 30mph 30.61mph
Reading at 60mph 60mph 61.21mph
Ride height gain 0mm -6.95mm
Arch gap loss 0mm -6.95mm

Thanks - that's helpful. I think you are right!
I shall wait to hear what the offset and wheel widths are.

Et45 8.5j width+++

What make and type of tyre are fitted? And how much are you asking?
Would a couple of pictures be possible?
Thanks

Will try and get some pics buddy, the rears are Accelera newish and the fronts I think are contis but would have to confirm as I cannot remember :Confused: getting old! They are dirty so ideally you want clean shots. Offers really as not sure what they are worth, also not in any rush to sell.+++

Thanks. Im in no hurry either so could work well. Presume tyres are all winter? Please let me have offset too.

If you fancy something a bit different, but still OEM, these RS6 rims on winters looks nice. ET is 38 so fill out the wheel arch nicely and centre bore is 57.1mm. Tyres also have correct load of 100V XL

http://www.ebay.co.uk/itm/162682679836?