A8 Parts Forum

A8 Parts Forum (https://forum.a8parts.co.uk/index.php)
-   VCDS (aka Vagcom) (https://forum.a8parts.co.uk/forumdisplay.php?f=75)
-   -   A8 D3 Values in Adaptation Mode (https://forum.a8parts.co.uk/showthread.php?t=13916)

Leorio 11th March 2018 07:05 PM

A8 D3 Values in Adaptation Mode
 
Can someone post Adaptation values in VCDS that he has in channel Climatronic (Auto HVAC) please? Also if that's not a problem if someone has working Webasto please post coding of your Aux Heating and Adaptation Values as well.

Thanks!

tc4332 11th March 2018 07:52 PM

The settings depend on what you are trying to do.

Have you read this thread?
http://forum.a8parts.co.uk/showthread.php?t=13803
There are two important Aux Heater settings in the PDF attached to the thread.
I did get rather deep into this area last year but I've mislaid all my notes whilst spending visiting hospitalised wife. Now she's back home I am having trouble finding them. Daughter-out-Law tidied everything = lost.:mad:

Leorio 11th March 2018 08:06 PM

What I am trying to do is to finally get the Webasto working. Short story it was working automatically without any controls in MMI, and was affecting fuel consumption and temperature gauge. I managed to enable controls, temperature gauge and fuel consumption was fixed but there was no icons from Aux Heating in the cluster. I fixed that too, Webasto is working, controls and timer as well, but the problem is that if I set the timer it turns on but have very low air output and blowing cold air. But when I turn ignition on it starts working properly and inside is warm straight away. So my guess is that I have something wrong in one of the Adaptation Channels in Auto HVAC.

I know that in one week I won't probably need it for a long long time, but I hate when something is not working as it should. That's why if you have any ideas I will be grateful.

tc4332 12th March 2018 07:01 PM

Hi Leo,
Apologies, very busy week.
I'll do a dump for you over the weekend and see what we have.
Somebody else will hopefully put their oar in before then.
I have a meeting in Chepstow and a funeral in Saltash this week.

Ray

Leorio 13th March 2018 10:41 AM

That's perfectly fine, no rush :). Thanks.

tc4332 19th March 2018 01:25 PM

2 Attachment(s)
Here you are Leo,
As per your request.

Leorio 19th March 2018 03:51 PM

Thank you mate!


All times are GMT. The time now is 03:45 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.