I don't have the six connection wired up on mine but yes that's my understanding of it, it basically repeats what input you have selected to the output so you could in theory split the output and send to headrests

I can confirm that the Aux Output gives a video/audio signal for the RSE(Rear Seat Entertainment). The output is whatever you have selected on the MMI.
I do not have RSE so I borrowed Guy's car and used a long RCA cable to send my Output to his Aux 1 input. Whatever I selected on my MMI was relayed to his MMI.

To save any misconception here are the pinouts tidied up:-


Aux Input 1
PIN 09 – Audio Shield left/right
PIN 10 – Audio signal left white
PIN 11 – Audio signal right red
PIN 12 – Video signal yellow
PIN 13 - Video Shield

Aux Input 2
PIN 15 – Audio Shield left/right
PIN 16 – Audio signal left white
PIN 17 – Audio signal right red
PIN 18 – Video signal yellow
PIN 19 – Video Shield

Video output (only for Hybrid-Tuner)
PIN 4 – Video Shield
PIN 5 – Video signal yellow
PIN 6 – Audio Shield left/right
PIN 7 – Audio left white
PIN 8 – Audio right red

I have the opposite problem, the video works fine but the sound doesn't....I ear sound, but totally distortional.

I connect the kufatec cable in AV1 and AV2 pin out but the same result... perfect video and sound distortion.

I checked the cable with a multimeter and looks good. Also with another mirror link, and the same problem always.

What could be the problem?? My car has B&O

When I first fitted the Apple TV in my car the audio buzzed like a mofo, I bought a cheap ground loop isolator from eBay and now it’s perfect, could be worth a go


Here’s a linky

https://rover.ebay.com/rover/0/0/0?m...2F250489744414

Ok thanks! I'll buy them. I found a cheap one with "gold" plated connectors and CE marking. I'll post the final result 😉

Thanks again!🍻