Heating system flush
It was worth it, i highly reccomend :D
https://i.imgur.com/LsCezsQ.jpg https://i.imgur.com/NkF9A3G.png https://i.imgur.com/arLvk6Q.png https://i.imgur.com/J55mEmn.png https://i.imgur.com/AN9c8Vz.png I also replaced the heating valve block/motor If someone plans on doing this, it took me about 9h start to finish with no breaks. Result = I now have a car with working heat and AC +++ |
Did you follow the manual? Any tips / handy hints along the way?
|
One tip I can give is to start flushing with a very low pressure and wait for water to start coming out the other end, once it starts coming out then you can safely increase it.
Also you will find quite a few corroded connectors in the ECU box so have contact cleaner ready. |
Also this diagram is useful:
https://i.imgur.com/iagnNgE.png I flushed each heater core in 2 directions as well. |
All times are GMT. The time now is 06:36 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.