D3 Front bumper mountings/bolt
 

Hi All

So in the process of removing the alternator from my 2007 D3 and need to remove one of the front bumper (driver side front wheel arch) mountings, which is attached to the front wing with a 15mm nut. One of the 3 bolts then goes through this and is secured with a 10mm nut.

The problem is, the nut mounting I mentioned won't come off, so I'm likely going to need to shear it off and replace it.

I would be grateful if someone could point me in the direction of an exploded diagram so I can start to source a spare?

thanks all in advance.

Have a look here

https://audi.7zap.com/en/rdw/audi+a8/a8/2007-291/8/