Camshaft positioning sensor V8 petrol
 

Hello chaps

My car refused to start the other day and I could hear it clearly cranking over but not 'firing' into life.

A quick scan seems to have revealed a cam positioning sensor fault. I've ordered two as they're cheap enough. My question is does anyone know how hard they are to replace?

I note the driver's side sensor sits at the front of the engine and the passenger side sensor at the rear of the engine.

Is it just a matter of un-doing the 2x bolts that hold these in place to remove them?


thanks

-
 

yes only 2 bolts holding each camshaft possition sensor.
One sensor is on the front left side engine and second one at the right back side of the engine.