Lights and Lamps List
1 Attachment(s)
Whilst trying to sort out exactly what types of lamps (bulbs) were fitted to the car, I thought that it would behelpful to make a list for my own use so, for example, when a special offer on LED festoons /h7s or whatever came up I would know which type and how many I would need. So I went through the car (2002 FL S8) and listed all that I could find - with the exception of the tiny little things which illuminate the door handles!!
If anyone wants to add to this please do and I have left a few columns for PF cars. |
Puddle lights?
|
Now, IIRC, someone did a similar exercise for LED replacements, so it would be good to combine these and to include variations (I know some sidelight bulbs are the push fit type, for example.
And then, perhaps, it would warrant being a 'sticky'? Nice work David (but you really should get out more! ) :) |
Here is the list I compiled when I did the upgrade ....
Herewith List of Bulbs required for LED Mod to all Interior, Trunk and License plate Bulbs 2 x 6411 41mm Festoon Type Bulbs - FRONT DOME 2 x 6418 36mm Festoon Type Bulbs - REAR DOME 2 x BA9S Bayonet Type Bulbs - FRONT READING 2 x BA9S Bayonet Type Bulbs - REAR READING 4 x 6418 36mm Festoon Type Bulbs - PUDDLE (DOORS) 3 x 6418 36mm Festoon Type Bulbs - BOOT 4 x 6418 36mm Festoon Type Bulbs - FOOTWELL 2 x 6418 36mm Festoon Type Bulbs - VISOR MIRROR LIGHTS 2 x 6418 36mm Festoon Error Correcting Type - NUMBER PLATE. Thread.... http://forum.a8parts.co.uk/showthread.php?t=3374 Thanks for the additional Info Dave +++ |
Quote:
I'll amend the table.... |
Quote:
Also what is the "error correcting" bulb for the number plate? (Mine looked like standard festoons.) Note to self - missed the footwell lights.. :tuttut: |
Quote:
|
Quote:
I have just looked at some festoons on www.autobulbsdirect.co.uk and under their list of 42mm festoons they list a Canbus compatible lamp of 41mm! Other are just 42mm. :Confused: I appeciate that the festoon bulb holder can accommodate a small difference in length. I presume that the interior lamps do not have to be canbus compatible but the number plate lights do?? |
Quote:
|
Quote:
The codes 6418 etc are the original bulb ref numbers. http://www.tunerdomes.com/index.php?...wCat&catId=351 The "error correcting" bulb for number plate has built in resistor to prevent bulb out error ..... http://www.tunerdomes.com/index.php?...d&productId=79 Hope this helps.... |
All times are GMT. The time now is 04:15 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.