Tool arrived - One tooth off?
So, the Cam alignment tool along with the crank lock pin finally arrived.
The Cam tool did not fit between the cams when crank at TDC. I had to adjust it(removing crank pin first) just a little bit in order for it to fit.
As far as i can see it is 1 tooth off?
And the question is, what are the chances that this may have bent a few or more valves?
__________________
2003 Daytona Grey RS6
2000 Silver S8
2005 A6 1.8TQ Premium
1993 Audi S4 2.2 TQ MTM 330 (my first love!)
|