Hello Matthew , the fueling trims are much closer to where they want to be now .
I would of thought for the loss of mpg the brakes would have to be sticking a fair bit but any dragging brakes will not help .
When you do the job give the brake pad hangers a good fileing get rid of all the rust so the pads fit nice , when you use vcds to open the rear calipers in basic settings the Pistons should be able to be pushed back quite freely ...check for corrosion behind the piston rubbers , same with fronts the Pistons should be able to be pushed back easy enough , sometimes the pads can get really tight in the hanger so as the disc warms up the bind gets more progressive .
|