Quote:
Originally Posted by IT
To get any life out of the RNS-E at all, you have to bypass the Can gateway as the RNS-E talks native Audi canbus straight to the D2 cluster, but not in a colour resolution that the D2 cluster understands (seemingly)
|
Okay, some usefull background there - thanks.
Earlier you said...
Quote:
Originally Posted by IT
The RNS-E does successfully transmit text data for Radio/CD/MP3 into the top line, so its not like a bad coding config or mismatched canbus signal.
|
So is that going through the gateway or not?
Quote:
Injecting graphics into the DIS via canbus is certainly do-able, just a case of whether the effort of getting the D2 one to work is worth it.....
|
Probably not... but I'm prepared to give it a go because I like a challenge. I'm certainly not expecting a quick fix.
@MikkiJayne:
So what is the best way to go about getting me some test kit (RNS-D and D2 cluster would seem to be the minimum). I see you're in Devon, which is a bit far for a collection (I'm in London/Horsham), but I'd contribute to postage - no need for you to be out of pocket.
And if possible can someone point me at some pinouts (esp. for cluster) for power and relevent CAN lines?