Hi mate,
Well done on installing the extra parts to the Aux. Heating. The module is one of those without a VCDS label file. I have been meaning to write one but never got round to it.
Since I've some time on my hands with Christmas leave I may as well do it now.
Mine is petrol and without Aux. Heating so I can't interrogate the module for output test numbers. So I was wondering if you could test the label file so far. It's currently only selective output tests and most of them will work except for "Signal for activation of fresh air blower" as I'm unsure of its test number. If you could run the "Signal for activation of fresh air blower" tests and let me know which test works either A,B,C etc.. that will be very useful.
Save the attached label file, delete the .TXT extension, then copy it to LABELS/USER/
Selective output tests will be much more useful than running all of the sequential tests for purging fuel or testing the valves / pumps.
I'll then finish the output tests section then move on to measuring blocks, adaptations etc..
