[Goran]

Hi Adrian, how are you?
I am still in London. Thanks for recommending Camspec.
I seem to remember the tricky bit was the belt tensioner (some spacing needs to be right?) and eccentric pulley. I always found it worrying how the cam sprockets can just rotate freely when tensioning the belt, then get pressed onto those sloping bits by the bolts. Strange design.
I haven't been to MRC for a long time. They did a huge amount work on my car they were excellent and very knowledgeable and spotted things which were about to go wrong that other people missed. I was most impressed by the gearbox work they did for me, fitting stronger shift collars and a 0.56 6th gear. And chain guide pad replacement, without removing the cams, which turned out very reasonable.