Quote:
Originally Posted by MikkiJayne
Its a weird one this. I've never seen anything like it before.
You could open the bleed valves on the calipers to relieve the pressure, but if the brake pedal is on the floor then its not really driveable. Can you pull the pedal back up? I'm wondering if its the servo which has failed and pulling the pedal down, rather than the master cylinder.
|
Hi Mikki!
Yeah its a weird one! I was hoping you would see this post, I was curious if you had hear of this before.
I tried pulling the pedal back up, so did the RAC guy, it wouldn't budge. Even with the vac hose disconnected.
Where is the servo? Is that the big black round thing attached to the pedal box where the vac hose goes?
My understanding of how the brake pedal works is not good lol.
Thanks!