[Julian Thompson]

I have fitted the Mr12Volt interface to my D3 3.0 TDi MMi2 High. It works really well, adding CarPlay and generally updating the setup a lot.

My car has the CD changer as standard, and I have inserted the mr 12
Volt box on the most bus loop before the cd changer. The car is now moaning on vcds that the media position is incorrectly coded. The car is coded to media position 2. Should I disconnect the mr12 volt and put that after the Cd changer? Or should I try to recode the car? If so, would it now be media position 3 I would use for the Cd?

Thanks!!