Quote:
Originally Posted by reyxlp
I tried pushing it in further by hand first but couldn't get it to budge so I was reluctant to try and tighten the bolt without first consulting the community here.
It's from a Quattroworld forum member who just had a batch made.
I see what you mean and thanks for the side by side pics to compare. (I couldn't even figure out how to post mine properly lol...)
I will go ahead and get a proper measuring tool to confirm the block measurements and see if they match what the member intended. There are also specs available online, I can't remember where- maybe here.
|
Measured the block and it seems to have the exact correct dimensions per this:
https://forums.quattroworld.com/a8/msgs/5713.phtml
Also, found this from MJ on a prior brake block group by thread here: "The block slots over the brace and has a slight preload once tightened up."
So I will probably just try and tighten it carefully and see if that does it.