[GlynH]

Apologies for yet another error code question. I did think about putting them all in a single post but figured it would make more sense if I posted singly.

01548 - Sensor for Parking Aid; Rear Right (G206)
009 - Open or Short to Ground

01547 - Sensor for Parking Aid; Rear Mid-Right (G205)
009 - Open or Short to Ground

Annoyingly a fault on the rear locks the module out so that even the front doesn't work and I never noticed how lazy I have got and how much I depend on the parking sensors. And I will admit to having my car washed at the local 'Eastern European' car wash with their reliance on pressure washers so only myself to blame I guess!

Am I correct in thinking the sensors affected will be 3 & 4 counted from left to right when looking at the back of the car; i.e. offside & adjacent one to the left?

Is it easy to get to the multi pin connector(s) to give them a 'wipe' before I pronounce both sensors dead?

Do the sensors themselves come out easily and/or does the rear bumper have to come off? If so how?

Any hints/tips/gotchas or other advice would be much appreciated.

I have a few more questions but figured I might be patient and wait for any responses on this little lot to die down first

Thanks again & kind regards,
-=Glyn=-