10th October 2017, 07:17 PM
|
|
Senior Member
|
|
Join Date: Sep 2009
Location: N. Devon
Posts: 2,715
|
|
Quote:
Originally Posted by moltuae
Your blower foam repair inspired me to check the condition of my foam Andrew.
Mine had deteriorated (felt a bit mushy/crumbly) but it was still fairly intact, so I was able to take some measurements. It was approximately 15mm high by 15mm wide.
So, after a bit of searching I found this:
http://www.ebay.co.uk/itm/NEOPRENE-R...K/351276385555
(Be sure to select the 15mm wide stuff).
On my first fitting attempt, copying the original foam, I tried separate lengths with mitred corners. That worked but I decided there was a neater, quicker solution, so I ripped it off and instead used a single piece, joined at the back. The foam goes around the corners easily and, done this way, it's a 5 minute job.
|
You made a nice job of that mate, loving the tidy corners
__________________
1996 A8 4.2 QS. Bose, Solar roof, um...um... rally sport towbar. Now gone to a new home as the Traders 8.
Bright yellow bus o love.
|