Quote:
Originally Posted by limoncello
only thing i can think of to possibly help is to lower the percentage of the drls? take it down to 50 , clear the codes and see what happens
|
The later cars with standard LED DRL use the sidelight wire for DRL (as the DRL also functions as the sidelight at reduced power), so coding for that turns off our DRL and leaves the sidelight on all the time, the best bet would be to swap the wires/pins over in the connector and that would cancel the warning too.
I don't know why people sell these bulbs as having anything to do with CANBUS, it has nothing to do with this whatsoever.
If you get no errors with this Sloss, I might try it, but it says only 1W which would give error.