Hi MJ,
I bought the fan you recommended and a piece of nylon 6 sheet.
I was ready to do the conversion but then I had doubts if my AC fan is switching on correctly.
If engine temp is 100C on the Engine advanced measuring blocks, should the AC fan be kicking in at the low speed?
Mine does not start at all unless the AC is running and unless the engine temp is something like 110C on the cluster needle dial. Is this correct operation of the AC fan?
Also I tried the rolled up newspaper test on the viscous fan when engine temp was 100 but I couldn't slow it down or stop it so perhaps its working fine.
|