Quote:
Originally Posted by David's8
Good write up MJ.  Definitely a good alternative to the Audiworld methodology. As you said though, with all your new bolts etc in place it does make it a bit easier.
The combo of the ratchet spanner with the Torx bit is a neat solution rather than grinding down the Torx as per Audiworld, |
Sadly, I'm having to refer to this write-up again, as Herman has been throwing a PRNDS fit intermittently, and just before Mark's funeral, which couldn't be worse timing
.
Here's hoping it's just the contact terminals that need a clean-up, particularly as this unit was only replaced with a new one in 2017
