View Single Post
  #103  
Old 22nd June 2018, 02:28 PM
steamship's Avatar
steamship steamship is offline
Senior Member
 
Join Date: Jun 2013
Location: Londonderry, Northern Ireland
Posts: 2,950
Default

Quote:
Originally Posted by homer simpson View Post
Now reading through the thread I have concluded that my 2008 S8 will need a spacer to fit the SKODA heated fan washer jets. It already has the triple jets as standard.
Not quite. The FL D3 doesn't require the spacer, but the PF D3 does. See the comment by tc4332 (Ray) regarding the reasons.

I know that the ones I bought off AliExpress and fitted to my '08 S8 were fine. I did buy another set to fit the '04 A8, but haven't got around to fitting them. In theory, they should be loose and require the spacers, which I also bought. If I can both parts, I'll try fitting them today and confirm what Ray said.
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts

My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts

Sold! 2008 S8 D3 5.2 V10 - Engine: BSM, Gearbox:KLW, Colour:LY7F Suzuka Grey Pearl Effect, Interior:Black/Black with Silver/Black valcona leather with carbon atlas inserts, Bang & Olufsen, Heated windscreen, Soft-close doors, TV, DAB, AMI, Quad Zone, Auto Boot, Auto dim Mirrors, Keyless entry, PDC with rearview camera, AFS II Headlights

My DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds
Reply With Quote