You would be way out if the bolts did not align, there is a free play in bolts to allow for adjustment. For D2 S8 camber should be -15' to -1°15' on each side so the range is 1 ° or 60' but the difference between 2 sides should be less than 30' or 0.5° so you could have one side -20' and the other side -1°10' and they would both be within spec individually but the difference between both sides would be 50' so way over limit. As little as 1mm movement of subframe sideways can cause you to be out of specification and 2.5mm or more will certainly make it out of spec unless it was wrong before and you were lucky enough to move it right direction to correct it.
__________________
Currently 8less
2011 Q7 S Line 3.0TDI, 2016 Tesla Model S 90D
8 history:
2006 A8 Sport 4.2TDI quattro SOLD,
1997 S8, reached end of life with gearbox failure
Last edited by ainarssems; 13th August 2016 at 12:46 AM.
|