Quote:
Originally Posted by MikkiJayne
They aren't related electrically, but the ABS sensor cable assembly provides the wiring between the caliper and the car.
Most often its corrosion on the connectors of the pad wear connector. Cleaning them up with a tiny round file and tweaking them with a tiny screwdriver often helps. Ditto the body harness connector. A squirt of WD40 stops them corroding again.
|
wow ! I had no idea ! so in effect there is a there is a sub harness with the ABS and pad wear wires running through ; in case I can't cure the problem by cleaning up the pad wear connector where do I find the body harness connector to clean it up ?
if that doesn't work presumably our sponsors could find me a replacement sub harness !