Quote:
Originally Posted by neeldub
Wiring Diagrams attached...
|
Hey guys i am in the process of retrofitting this.. All is set but i'm having a minor issue with the wiring.
Can someone explain the wiring on the last page for me please.
What happens at connection B565 in the main wiring harness... Do the wires from both doors join here to connect to pin T10v/4 to the bumper connection?
I've got the following error message at the moment as a result of this..
Address 3C: Lane Change Labels: None
Part No SW: 4L0 910 566 C HW: 4L0 907 566 B
Component: J0769_SWA_MasterH01 0020
Revision: 00H01000 Serial number: 6PZ 009 014-10
Coding: 0010101
Shop #: WSC 31414 790 00001
VCID: 2E54842BB96DB53202-807A
Subsystem 1 - Part No: 4L0 910 568 C
Component: J0770_SWA_Slave_H01 X080
Subsystem 2 - Serial number: 6PZ 009 014-30
Subsystem 3 - Serial number: 5F21.11.0700H010003C910145ÿ
Subsystem 4 - Serial number: 910145ÿ
3 Faults Found:
01517 - Control Module for Trailer/Towing Sensor (J345)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 4
Fault Frequency: 1
Reset counter: 227
Mileage: 123056 km
Time Indication: 0
Date: 2016.08.18
Time: 17:55:32
02854 - Warning Lamp for Lane Change Assistance (in right exterior mirror) (K234)
010 - Open or Short to Plus
Freeze Frame:
Fault Status: 01101010
Fault Priority: 3
Fault Frequency: 1
Reset counter: 227
Mileage: 123056 km
Time Indication: 0
Date: 2016.08.18
Time: 18:01:02
02001 - Data-Bus Automatic Distance Regulation
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 3
Fault Frequency: 2
Reset counter: 12
Mileage: 0 km
Time Indication: 0
Date: 2008.01.01
Time: 00:00:00
Any ideas?
Thanks