View Single Post
  #19  
Old 2nd August 2020, 04:16 PM
Audifan Audifan is offline
Senior Member
 
Join Date: Feb 2020
Location: America
Posts: 388
Default

I finally got around to finish my glove box light assembly fix. Here is the finished result. The plastic L brackets that I used were from a used rear view mirror that I bought.




And in case anyone was wondering where these light assembly install, this is what it looks like. As you can see in this picture, I need to do some trimming because the L bracket that I made is too wide and will not fit in the mounting hole.




I fixed the broken wire that I had when I removed the light assembly. I actually cut both wires and added length because the original wires were too short to begin with. I also has to switch the wires around so my LED light bulb would work.

Now my car has all working LED interior lights.
Attached Thumbnails
Click image for larger version

Name:	glove box light 2.jpg
Views:	677
Size:	32.6 KB
ID:	24443   Click image for larger version

Name:	glove box light 3.jpg
Views:	664
Size:	56.4 KB
ID:	24444   Click image for larger version

Name:	glove box light 4.jpg
Views:	699
Size:	29.8 KB
ID:	24445  

Last edited by Audifan; 10th November 2020 at 01:22 AM. Reason: switched pictures to attachment
Reply With Quote