Still working with FLM though.
Wouldn't you be better looking or waiting for a good quality SLA printer as the results can be chalk and cheese I believe?
With mine, watched a video on setting the bed up better (not using paper) and been printing today and so far so good - found that having the bed at 70 and not 60 for PLA seems to work a lot better (so far).
But, the printer is still printing so will not know how good the parts are until then although they stuck better to the bed this time......
__________________
Andy.
Current cars:
BMW i4 M-Sport
Peugeot 207 (the sons)
Triumph Daytona 675 (2017 reg)
===========================
Gone but not forgotten
Ford Focus ST-2 Mk3 (the wifes) (stolen Oct 2023)
1972 T2 Bay Window Camper (Slow)
Audi TT Mk1 225 - now with coil-overs and a 7inch touchscreen infotainment centre
2003 A8 Sport 4.2 (with ACC & LPG) (Feed up with all the issues so passed it on to a forum member)
2000 A8 FL QS 4.2 (with RNS-E - Nice  ) (Engine poorly so sold on to be brought back by someone who has the time)
|