Scanned the car again tonight after work and got this:
012295 - Camshaft Position Sensor (G40)
P3007 - 001 - No Signal
Freeze Frame:
Fault Status: 01110001
Fault Priority: 0
Fault Frequency: 5
Reset counter: 255
Mileage: 364983 km
Time Indication: 0
Date: 2018.11.13
Time: 08:19:29
Freeze Frame:
RPM: 147 /min
Torque: 27.3 Nm
Speed: 0.0 km/h
(no units): 32.0
Voltage: 8.51 V
(no units): 193.2
(no units): 338.8
I also got the ABS fault again and the usuall glow plug faults (6 of them are open circuit)
The time and date are suspect again but will be from yesterday as it was definitely cleared. I tried starting the car, but as it often does when youtry to start it when its connected to vcds it had a total meltdown and flattened the battery in seconds after managing about half a turn of the engine. Tried again with another battery and it did the same thing.
I'm going to get a cam sensor for it. For the money I've nothing to lose really. might work, might not. I had a quick look for burst pipes but (A) its damn near impossible to see any and (B) I was starving!
__________________
Daily drive: 2008 A8 4.2TDi
2003 A8 4.0TDi. 4 zone climate, double glazing, Bose - dead
Other cars: 1980 Land Rover Series 3, 2.25d, hydraulic winch,Van/station wagon/topless depending on my mood
1990 Land Rover 90 factory county station wagon with all the luxury additions, such as a clock and a tape player.
2007 A4 3.0TDi s-line cabriolet quattro
2000 A8 D2 2.8 quattro, looking for a new home - gone
2003 A6 3.0 quattro, in the way... anyone want any parts? - gone
|