Quote:
Originally Posted by steamship
The only info I have is 14.8x1.9 which I'm assuming is millimetres.
|
Thanks
Quote:
Originally Posted by S81
I checked that today and there's nothing on the packing labels,I measured it and its approx 17 mm centre to centre ,I changed all 4 of them today and the old ones were hard and tight ,the new ones we 're slight loose i thought on the valve but when I put valves back in they were nice and tight when I seated them ,they were £3 each approx as Sean had said they are just normal o rings but i went with the genuine as i wasn't able to be sure of getting the correct size
|
Thanks for getting back, I have a leak on right side Lower left corner
Took cover off & looks like it’s wraped as does not sit flush against a straight line so have ordered a new cover & will change o ring on the solenoid