View Single Post
  #35  
Old 15th April 2018, 01:01 AM
neeldub neeldub is offline
Senior Member
 
Join Date: Oct 2015
Location: London
Posts: 131
Default

So here's another issue..

Side assist is drawing too much current while the car is 'sleeping' and ignition/ignition off. I connected my multimeter to the fuse i retrofitted (In the left fuse box), fuse 36, and it's showing me that there is a current draw of 331 milliamps which i'm guessing is causing my battery to drain significantly. There are no error codes stored on the side assist modules which would indicate a power issue with the units. My understanding is that CANBUS should put the modules to sleep when everything is completely off but that's not what's happening in my case.

Any help or advice would be appreciated.

Many thanks
__________________
Previously:
2010 Audi A8 4E Quattro Sport TDI Oyster Grey



Currently:
2015 Audi A8 4H Sport Executive Quattro in Monsoon Grey
Reply With Quote