View Single Post
  #2  
Old 10th September 2017, 08:22 PM
MikkiJayne MikkiJayne is offline
Senior Member
 
Join Date: Jan 2012
Posts: 5,017
Default

Gorgeous!

I'm fairly sure that chunk of stuff is just for the brake servo. The plastic piece is a suction jet pump which just helps pull a vacuum. If you've got no other vacuum powered stuff then you should be able to just blank off both ports.

The manifold changeover valve obviously uses vacuum, but iirc that takes its vac feed from the front of the manifold. The 40V does anyway. Not 100% on the 32V though.
Reply With Quote