Video/TV input plug for RNS-D
I seem to have an ongoing problem with the Video/TV input to my RNS-D. It's used for the reversing camera and Freeview TV.
Basically the **** thing comes loose and loses the input, usually starting with the sync. There is no "clamping" mechanism unlike most of the other connectors. 
So, I'm looking for a solution, ideally a new (tighter fitting) plug that I can either graft on to the input lead or a short M-F lead to act as an extension.
It's a rare/unusual/weird 10-pin (plus shield) DIN-style female socket and male plug (bottom right here). (NOT a mini-DIN, it's full-size!)
Any thoughts or suggestions? 
__________________
2003 D2 FL S8. Irish Green Pearl/Beige. Solar sunroof, auto-dim mirrors, electric rear seat functions, ski hatch retrofit; extended leather. Aftermarket DVB-T, reversing camera and full XCarlink (Bluetooth etc.).
2016 Volvo V40 T5 Cross Country (4WD) with ALL the toys including adaptive cruise etc. etc. Osmium Grey with Blonde/Charcoal leather interior. Polestar performance "optimisation".  (A much rarer model than a D2 S8 by the way!) Oh, and a brand new engine at just under 30,000 miles on the factory one! 
Finally: gone, but not forgotten.....
1998 D2 PF S8. AgateGrey/Platinum. Every option (I think) except electric rear seats, tiptronic steering wheel, ski hatch, towbar & dimming door mirrors.
e.g. Cruise control, NavPlus/TV, Bose, GSM, Xenons, Solar roof, Parking sensors, Alcantara/leather everywhere of course.  (internal dimming mirror added later)
1998 (very early) Ford Focus 1.8 Zetec; ABS/TCS, Heated screen/mirrors, Aircon, Auto-dim mirror, Leather, Trip computer, Cruise control, OEM Ford SatNav with CD changer.
And before that a lot of Rover 800s, a few oddities, a lovely Triumph Dolomite 1850HL with Overdrive and way back in my schooldays an Austin Seven aka Mini 850!
Last edited by HPsauce; 7th November 2017 at 09:44 PM.
|