Well after carefully reading wiring diagrams in Elsawin I made a wiring loom from scratch and installed in the car
Luckily ALL the necessary pins were the same kind, and I already had a box of those in my tool cabinet
But I had to buy all the connectors and fuse holder from the dealer, ended up costing around 100€ just for those small plastic parts... But now it's working and all is well
Also, after mounting the rear seats I found that one of the headrests and one of the lumbar up/down weren't working, so I had to take everything apart again and disassemble the rear backrest to fix it.. The motors were running but no movement, it was the steel wires between motor and mechanism that had slipped out of its place in one end..
__________________
06 A8 3,0TDIq My daily driver and project...
97 A4 1,8Tq. Powered by a 4,2 from the '01 S6, full rollcage, FIA seats and 6-point harnesses, B5 RS4 KW Competition race suspension, B6 S4 brakes, 18" Toyo RS1 slicks, carbon fiber roof. V8 trackday racer
14 VW Caddy 1,6TDI from my employer..
(X)00 A8 2,8q, (X)97 A4 1,8Tq, (X)92 S4 2,2Tq, (X)92 80 2,3E