It seems those steel wires are about 10mm too short, so in time they will slide down deeper into the square hole in the motor unit.
I pulled the wires out, cut the head off from a 3mm bolt and dropped the threaded part into the hole of the motor. That way the wire can't slide so deep, and it wont jump out from the other end..
__________________
06 A8 3,0TDIq My daily driver and project...
97 A4 1,8Tq. Powered by a 4,2 from the '01 S6, full rollcage, FIA seats and 6-point harnesses, B5 RS4 KW Competition race suspension, B6 S4 brakes, 18" Toyo RS1 slicks, carbon fiber roof. V8 trackday racer 
14 VW Caddy 1,6TDI from my employer..
(X)00 A8 2,8q, (X)97 A4 1,8Tq, (X)92 S4 2,2Tq, (X)92 80 2,3E
|