I did check for this so far as i was able and there was nothing obvious in the parts of the loom accessible from the boot area. after that it disappears into the car interior. i am going to accept the issue and bypass whatever it is with a direct run.
Quote:
Originally Posted by tonupkid
Hi David. I know little about the technical aspects of this issue, and you seem to have these well covered.
I understand that you have a voltage drop between the hot (supply) side of your wire and its arrival at the CLP.
It might be worthwhile investigating whether there's been some rodent action.
|
__________________
2002 D2 S8 – Ming Blue, Valcona leather, Vavona wood insert, solar sunroof (to be fitted), Heated rear seats, extended leather pack, 18” Avus, ski hatch, Bose, auto dim rear view mirror, rear blind.
|