Thanks John,
I also saw that one on ebay. but its that the one with the broken sensor or is it this on http://cgi.ebay.de/ws/eBayISAPI.dll?...=STRK:MEWAX:IT ?
Ali measured the resistance for me and it shoud be 470 ohms with the seat occupied so now i can also put a resistor between it.
__________________
You only need 2 tools: WD40 and Duct Tape. if it doesn't moves use WD40... if it moves but it shouldn't use Duck tape
Last edited by rutgerf; 9th July 2010 at 02:46 PM.
|