Whole linkage. It may come from A8parts without the motor unless you request otherwise. You can swap in your old motor if you're happy with how to line everything up.
You'll need to take the scuttle panel out to get the linkage out - the two outer bolts tend to seize in to the speed nuts so soak them in your penetrating oil of choice beforehand, and pay close attention to the square plastic bushing when removing. Its very easy to break the plastic panel taking the bolts out - you'll see why when you have a look at them. There is one more bolt in the middle under a round cover.
To get the linkage out of the car you need to remove the driver's side bonnet strut. Prop the bonnet up with a stick or broom handle then take the bonnet-end of the strut off and lie it down, then the linkage will swing out. I'd suggest covering the wing with a cloth so you don't scratch it.
Everything else is pretty self-explanatory. Its a good opportunity to swap the heated washer jets while the scuttle trim is out, since they're usually not heating any more by now.
MJ
