Your blower foam repair inspired me to check the condition of my foam Andrew.
Mine had deteriorated (felt a bit mushy/crumbly) but it was still fairly intact, so I was able to take some measurements. It was approximately 15mm high by 15mm wide.
So, after a bit of searching I found this:
http://www.ebay.co.uk/itm/NEOPRENE-R...K/351276385555
(Be sure to select the 15mm wide stuff).
On my first fitting attempt, copying the original foam, I tried separate lengths with mitred corners. That worked but I decided there was a neater, quicker solution, so I ripped it off and instead used a single piece, joined at the back. The foam goes around the corners easily and, done this way, it's a 5 minute job.
__________________
Mark
------------------------------------------------------
2002 FE S8 Ebony Black Pearl
------------------------------------------------------
------------------------------------------------------
Cars Owned:
The Tesla Era: 2020 Model S Performance Ludicrous+ (present)
(Black, with all black premium interior and carbon fibre décor, 21" sonic carbon twin turbine wheels and FSD capability)
The Audi Era: '97 A8 4.2 (Ming Blue) --> '96 A8 4.2 QS (Dark Green) --> '02 FE S8 (present)
The Citroen Era: '84 BX 1.6 RS --> '89 BX 1.9 DTR Turbo --> '94 XM 2.0L Turbo --> '96 XM 2.0L Turbo Exclusive --> '00 Xantia Activa 2.0L Turbo
The Banger Era: '76 1.2L Lada VAZ-2101 (Ruski Fiat 124) --> '80 1.7L Morris Ital HL, finished in Ermine White and Rust