A8 Parts Forum  

Go Back   A8 Parts Forum > General Motoring > VCDS (aka Vagcom)

VCDS (aka Vagcom) For all your electronic debug / diag advice queries and mods.

Reply
 
Thread Tools Display Modes
  #1  
Old 9th June 2012, 03:06 PM
mannyo mannyo is offline
Senior Member
 
Join Date: Jan 2012
Location: Blandford, Dorset
Posts: 1,974
Default Code D2 central locking for alarm beep

Right, so have VCDS which I currently only use to scan and fix errors on my A8.

I would like to program the central locking to beep when the car is locked / unlocked in addition to the currently flashing indicators. The current controller coding is: 13130 , so could someone advise what needs to be added to enable the lock / unlock beep.

With my previous car altering settings was easy, as it had full Canbus and you could use the long code helper, but seemingly not with the A8.

Address 35: Centr. Locks Labels: 8D0-862-257.lbl
Part No: 8L0 862 257 P
Component: CV-Pump, Alarm, RC D17
Coding: 13130
Shop #: WSC 00000
VCID: 428F4E3B641F
__________________
Manny
2004 A4 1.8T Sport Cabriolet, 89K Miles
Past
2004 D3 A8 3.7 Quattro, Xenon, Bose, Blinds, Solar Sunroof, TV, ACC, phone and almost every option. 168K miles rising slowly
with retrofit AMI and DVB-T in place of Analogue
2003 Volvo S60 D5 SE Manual, 197K miles.
2001 D2 A8 3.7 QS, Bi-Xenon, Bose, Blinds, Electric Everything, retrofitted RNS-D, 191K Miles
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:47 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.