|
D2 - Wheels and Tyres Refurbing, center caps, tyre brands, tyrefitters - discuss it here |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Hub Locator Depth
Chaps,
Hopefully someone can help. A friend of mine works in an engineering shop and is knocking me up some spacers out of tool steel in exchange for a drink. These are the details I've given him, can someone correct me if I'm wrong? My friend has come back to me and asked for the depth of the hub locator, he's assuming it's 13mm, but wants to check. Can anyone confirm? Finally, having done some research on here today I've asked for 30mm per axle on the rear, and 26mm per axle on the front. I'm running standard S8 18" wheels, will this setup give me a nice flush look? TIA, Ollie |
#2
|
|||
|
|||
Hi Ollie
I have 20mm spacers on front and back..... I thnk 30/26 might be just a bit too wide... Could get rubbing on the arch.... If I have 2 heavy weights in the back seat mine rub on the Arch but this could be due too the lowered suspension.... Pic of Spacer on http://forum.a8parts.co.uk/showthrea...t=3143&page=11
__________________
" Love the Sound of a V8....... All Day " *still wish it was a V10* 2002 S8 D2 F/L H & R Springs, Koni Coil Overs, Dastek Chip, Sport Exhaust, 19" S5 Rims, Solar Sun Roof (Cause we have Sun) and most of the Bells & Whistles. |
#3
|
|||
|
|||
Quote:
Quote:
__________________
Currently 8less 2011 Q7 S Line 3.0TDI, 2016 Tesla Model S 90D 8 history: 2006 A8 Sport 4.2TDI quattro SOLD, 1997 S8, reached end of life with gearbox failure |
#4
|
|||
|
|||
Thanx for pointing that out..... Typical of me scanning and not reading ....
You right.....mine are 20mm per wheel so 30mm per axle would be Spacers do put extra strain on Suspension and Bearings....having to replace a Hub and Bearing at the Mo..... But they do give a nice "Stance" and if it isn't a daily driver the costs don't outwiegh the Looks IMO.
__________________
" Love the Sound of a V8....... All Day " *still wish it was a V10* 2002 S8 D2 F/L H & R Springs, Koni Coil Overs, Dastek Chip, Sport Exhaust, 19" S5 Rims, Solar Sun Roof (Cause we have Sun) and most of the Bells & Whistles. |
#5
|
|||
|
|||
Quote:
|
#6
|
|||
|
|||
Quote:
Hi mate, Yes I'm aware that they put more stress on componentry over time, however my car doesn't do big mileage and to be perfectly honest the factory look of the wheels buried in the arches looks dreadful in my opinion. I could take a wheel off and measure the depth of the hub locator, but that would mean doing it in the rain on a street in London, so if someone knows the depth it'd save me a job |
#7
|
|||
|
|||
Quote:
S is with the Stealers at the mo getting some TLC....
__________________
" Love the Sound of a V8....... All Day " *still wish it was a V10* 2002 S8 D2 F/L H & R Springs, Koni Coil Overs, Dastek Chip, Sport Exhaust, 19" S5 Rims, Solar Sun Roof (Cause we have Sun) and most of the Bells & Whistles. |
#8
|
|||
|
|||
That's very kind of you mate but don't worry. If no one knows I will do the same tomorrow
|
#9
|
|||
|
|||
Just in case anyone is wondering the depth of the hub locator on a 2001 S8 is 11.5mm.
|
|
|