|
Spotless For all your cleaning discussions.... |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Facelift D2 headlight detail
Hi there,
Well, my mate and i were inspired by a 'Detailing World' (DW) user 'Detailer27' when he posted his thread about reconditioning his Audi A3 headlights in his thread here and decided to have a go ourselves this weekend on a cold rainy saturday. My car is an Audi A8 with 163k miles on the clock so the headlights were seriously scratched (although due to my rubbish camera it was a bit hard to show). Products used: Megs wet and dry sandpaper 400 (dry) 800 dry 1500 wet 2000 wet 2500 wet 3000 wet Sand block Megs G220 Megs Plastix A bucket Detail spray 3M Tape microfiber towels This is what it looked like before... First off, we put the wet and dry paper in water with fairy liquid overnight to make sure it was properly lubricated and ready to use the following day. We then taped up the car and commenced with the sanding using 400 dry paper This is what it looked like after the first run. We then proceeded with 800 dry, 800 wet, 1500 wet, 2000 wet, 2500 wet and then 3000 wet. And here is the finished headlight... Please see some closeup pics below! The reason for the 400 dry is because it had some serious stone chips that required heavy sanding ... it can require quite some time even with 400 dry just to get to a point where you can get to a 'clean' layer of plastic to work with. Before.... After After 2 weeks, they were still beading...:thumb: Hope it is of use to others...:thumb: -oli |
|
|