#1
|
||||
|
||||
Towbar fitting
How did all.
I have an OEM towbar, swan neck and generic electric kit. I'm not too hot with electrics, but I've got help on hand. I've read something about a worm gear, is that something I need to be aware of? And how do I get hold of a wiring diagram? Thanks in advance.
__________________
2010 A8 SE Executive 4.2 FSI D4 2007 Mini Cooper S R56 2008 D3, gone, but not forgotten after 9 years and 90k. |
#2
|
|||
|
|||
Hi John. Are you connecting the electrics to module J345 Trailer detector control unit?
__________________
Matt 2004 A8 3.7q, 1998 A4 2.8q, 1994 Coupe 2.8q SORN, |
#3
|
||||
|
||||
Hi Matt. Is that installed on the car already? If not, no. Using a bypass relay. Not ideal, but needs must. The mechanical install is my area, the electrical side will be the brother in laws!
__________________
2010 A8 SE Executive 4.2 FSI D4 2007 Mini Cooper S R56 2008 D3, gone, but not forgotten after 9 years and 90k. |
#4
|
||||
|
||||
Is that the box I saw under my battery Matt?
__________________
2010 A8 SE Executive 4.2 FSI D4 2007 Mini Cooper S R56 2008 D3, gone, but not forgotten after 9 years and 90k. |
#5
|
|||
|
|||
I'm not sure if that module was standard equipment. It's located under the battery... (of all places!) Having said that it's probably easier to wire in a generic system.
The wiring can be found in Del's D3 Tech Dump, item 2 Current flow
__________________
Matt 2004 A8 3.7q, 1998 A4 2.8q, 1994 Coupe 2.8q SORN, |
#6
|
|||
|
|||
Probably. it's made by Westfalia, part 4E0907383(rev)
__________________
Matt 2004 A8 3.7q, 1998 A4 2.8q, 1994 Coupe 2.8q SORN, |
#7
|
||||
|
||||
I'm with you now Matt. Thanks very much. Again.
__________________
2010 A8 SE Executive 4.2 FSI D4 2007 Mini Cooper S R56 2008 D3, gone, but not forgotten after 9 years and 90k. |
|
|